9000W, 1/3Phase Electrical Heater with Titanium elements

Description

Features

• Fully equipped
• Easy installation
• Robust, durable construction
• Analogue control with 1degreeC differential
• Incoloy825 or Titanium heating elements
• 316 Stainless Steel or Titanium flow tube
• Ultra-reliable flow switch allows safe operation as low as 1000 ltr/h
• May be floor or wall mounted using swivel foot
• Control thermostat and safety thermal cut out (manual reset)
• 3 years conditional warranty

Construction
The ELECRO EVOLUTION pool heater is manufactured from top quality components and
materials at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings
manufactured from specially formulated polymer alloy material. Universal ABS unions are
provided to allow solvent weld connection to the inlet and outlet pipe work. The outlet
moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium
pin.
The heater is supported on two swivel feet; these can swivel to permit either wall or floor
mounting. The heater control components are positioned on the front face of the casing.
The water inlet and outlet fittings can facilitate connection to either metric or imperial
standard pipe. The inlet moulding has been designed to ensure full immersion of the
elements, greatly reducing the risks of air locking.

Operation
The desired pool temperature can be easily set on the ELECRO EVOLUTION heater using
the panel-mounted thermostat dial. The single or three-phase power is supplied through
a top quality Schneider contactor. Safety and equipment protection is provided by the
highly reliable flow switch. Over-temperature protection is provided by the thermal cut out
(manual reset).